Flex AWD V6-3.5L (2009)
Evaporative Emissions Hose: Service and Repair
Fuel Vapor Tube Assembly
Removal and Installation
1. Remove the fuel tank.
2. Disconnect the Fuel Tank Pressure (FTP) sensor electrical connector.
3. Disconnect the fuel vapor tube assembly-to-safety valve quick connect coupling.
4. Disconnect the fuel vapor tube assembly-to-fuel level sensor quick connect coupling.
5. Release the retainer clips and remove the fuel vapor tube assembly.
6. To install, reverse the removal procedure.
-
Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test See:
Testing and Inspection.
