Flex AWD V6-3.5L (2009)
Transmission Position Switch/Sensor: Service and Repair
6F50
Digital Transmission Range (TR) Sensor
Removal
NOTICE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the
Material specification and/or the transmission fluid level indicator for the correct fluid. Use only clean transmission fluid designated for this
transaxle and torque converter being serviced.
NOTICE: Do not mix Mercon(R) V or Mercon(R) LV transmission fluid. This may cause erratic shift feel, erratic shift timing and/or
transmission failure.
NOTE: Transmission fluid application:
-
Early build vehicles require MERCON(R) V
-
Late build vehicles require MERCON(R) LV
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
3. Disconnect the engine breather from the Air Cleaner (ACL) assembly.
4. Remove the 2 ACL assembly bracket bolts.