Flex AWD V6-3.5L (2009)
21. NOTE: Coolant hoses removed for clarity.
Install the transmission fluid filler tube and the nut.
-
Tighten to 11 Nm (97 lb-in).
22. NOTE: Coolant hoses removed for clarity.
Install the transmission fluid level indicator.
23. Route the coolant hoses to their position on the transmission fluid filler tube.
24. Place the manual control lever in DRIVE.
1. Rotate the manual control lever clockwise until it stops.
2. Rotate the manual control lever counterclockwise one detent until it stops.
25. Unlock the selector lever cable adjuster by sliding the locking tab over.
