Flex AWD V6-3.5L (2009)
Communications Control Module: Removal and Replacement
Audio Digital Signal Processing (DSP) Module
Audio Digital Signal Processing (DSP) Module
Removal and Installation
1. NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.
Upload the audio DSP module configuration information to the scan tool.
2. Remove the RH quarter trim panel.
3. Remove the 3 bolts and the audio DSP module.
-
Disconnect the electrical connectors.
-
To install, tighten to 7 Nm (62 lb-in).
4. To install, reverse the removal procedure.
-
Download the configuration information to the audio DSP module.
Audio Control Module (ACM)
Audio Control Module (ACM)
