Flex AWD V6-3.5L (2009)
Blower Motor Switch: Service and Repair
Blower Motor Speed Control
Removal and Installation
1. Detach the RH scuff plate trim panel from the RH lower A-pillar trim panel.
2. Remove the RH lower A-pillar trim panel.
3. Remove the 2 RH lower instrument panel insulator pin-type retainers and the RH lower instrument panel insulator.
4. Disconnect the blower motor speed control electrical connector.
5. Remove the 2 blower motor speed control screws.
6. Remove the blower motor speed control.
7. To install, reverse the removal procedure.
