ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Auxiliary Power Outlet|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 4576
Page 5
background image

-

Measure the resistance between DC/AC inverter C4210A-8, circuit RYA03 (BU/BN), harness side and AC power point C301-5, circuit RYA03
(BU/BN), harness side.

-

Are the resistances less than 5 ohms?

Yes

GO to B4.

No

REPAIR the circuit(s). TEST the system for normal operation.

-------------------------------------------------
B4 CHECK THE AC POWER POINT LED

-

Test the diode between AC power point C301-5, component side and AC power point C301-6, component side in both directions.

-

Is the resistance greater than 10,000 ohms in one direction and between 10-20 ohms in the opposite direction?

Yes

INSTALL a new DC/AC inverter. REFER to Direct Current/Alternating Current (DC/AC) Inverter  See: Service and Repair/High Voltage
Converter/Inverter/Direct Current/Alternating Current (DC/AC) Inverter. TEST the system for normal operation.

No

INSTALL a new AC power point. REFER to Alternating Current (AC) Powerpoint  See: Service and Repair/High Voltage
Converter/Inverter/Alternating Current (AC) Powerpoint. TEST the system for normal operation.

-------------------------------------------------

Auxiliary Power Outlet|Service and Repair > < Initial Inspection and Diagnostic Overview|Page 4576