Flex AWD V6-3.5L (2009)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Ignition Lock Cylinder - Functional
Removal and Installation
1. Insert the ignition key into the ignition lock cylinder and turn it to the ACC position.
2. Using a suitable tool, press the release pin and remove the ignition lock cylinder.
3. If a new lock cylinder with keys is replaced, the new Passive Anti-Theft System (PATS) keys must be programmed. For additional information,
refer to Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in Antitheft and Alarm Systems. See: Accessories
and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Programming and Relearning/Integrated Keyhead Transmitter (IKT)
Key Programming Using Diagnostic Equipment
4. To install, reverse the removal procedure.
