Flex AWD V6-3.5L (2009)
27. Using a suitable tool, remove the manual control lever shaft seal.
Installation
1. Using the Manual Lever Shaft Seal Installer, install a new manual control lever shaft seal.
2. Install the TR sensor.
1. Position the park pawl actuating rod in the TR sensor.
2. Install the TR sensor in the transaxle case.
3. Using the Manual Lever Retaining Pin Installer, install a new TR sensor locking pin.
4. NOTE: If cleaning the main control assembly or inspecting the valves, refer to Identification Tags. See: Application and ID If installing a new