Flex AWD V6-3.5L (2009)
2. Rotate the manual control lever counterclockwise one detent.
9. Unlock the adjuster by sliding the locking tab over.
10. Slide the selector lever cable end forward or backward to align it with the manual control lever.
11. With the adjuster locking tab unlocked, connect the selector lever cable end to the manual control lever.
12. Slide the adjuster tab to the LOCK position.
13. Position the ACL assembly in place and install the 2 bolts.
-
Tighten to 11 Nm (97 lb-in).
14. Tighten the ACL outlet pipe at the TB.
