Flex AWD V6-3.5L (2009)
-
Tighten to 5 Nm (44 lb-in).
15. Connect the engine breather to the ACL assembly.
16. Connect the MAF sensor connector.
17. NOTICE: Cardboard or equivalent must be used between the floor console trim panel and the floor console when installing the floor
console trim panel or the floor console retainers can damage the floor console.
Place a piece of cardboard next to the floor console and slide the floor console trim panel in place. Remove the cardboard.
18. NOTE: When installing the front of the center console trim panel, feel behind the panel to guide the panel into the retainer.
Pull the front of the center console trim cover upward to install it in the retainer.
19. Install the floor console trim panel in the floor console by pushing the retainers into the slots in the floor console.