Flex AWD V6-3.5L (2009)
23. With the adjuster locking tab released, connect the selector lever cable end to the manual control lever.
24. Slide the release tab back to lock the adjuster.
25. Position the ACL assembly in place and install the 2 ACL assembly bracket bolts.
-
Tighten to 11 Nm (97 lb-in).
26. Tighten the ACL outlet pipe clamp at the TB.
-
Tighten to 5 Nm (44 lb-in).
27. Connect the engine breather to the ACL assembly.
28. Connect the MAF sensor electrical connector.
