Flex AWD V6-3.5L (2009)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the driveshaft.
3. Using the Drive Pinion Flange Holding Fixture, hold the pinion flange and remove the nut.
-
Discard the nut.
4. Index-mark the location of the pinion to the yoke.
5. Using the 2-Jaw Puller, remove the pinion flange.
6. Using the Torque Converter Fluid Seal Remover and Slide Hammer, remove the seal.