Flex FWD V6-3.5L (2010)
-
Is the resistance less than 5 ohms?
Yes
GO to AA8.
No
REPAIR circuit SBP38 (BN/RD) for an open. TEST the system for normal operation.
-------------------------------------------------
AA7 CHECK THE TRAILER TOW PARKING LAMP RELAY COIL GROUND CIRCUIT FOR AN OPEN
-
Measure the voltage between the trailer tow parking lamp relay pin 3, circuit SBP38 (BN/RD), BJB face side and the trailer tow parking lamp
relay pin 2, circuit GD120 (BK/GN), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
REPAIR circuit SBP38 (BN/RD) for an open. TEST the system for normal operation.
No
REPAIR circuit GD120 (BK/GN) for an open. TEST the system for normal operation.
-------------------------------------------------
AA8 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new SJB. REFER to Body Control Systems. TEST the system for normal operation.