Flex FWD V6-3.5L (2010)
5. Disconnect the sun visor electrical connector.
6. Remove the sun visor clip screw and remove the sun visor clip.
7. Lower the front of the headliner to access the roof rack assembly front nut.
8. Remove the roof rack assembly nut.
-
To install, tighten to 10 Nm (89 lb-in).
9. NOTE: Using a non-marring tool, pry up from the outside of the roof rack assembly towards the inside, to release the roof rack assembly from the
clips.
Remove the roof rack assembly.
10. To install, reverse the removal procedure.
