Flex FWD V6-3.5L (2010)
a. Ensure the piston slots are aligned per WSM, Section 206-00.
b. The new caliper anchor brackets should have a small amount of grease under the brake pad spring clips.
c. Grease should not be applied to the sur[ace of the spring clips or come into contact with the pads.
4. Install new brake pads per WSM, Section 206-00.
5.
Install the rear wheels and tires WSM, Section 204-04.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are
not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100702A
2009-2010 Flex, 2010
0.8 Hr.
MKT: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
100702A
2009-2010 MKS, 2010
0.8 Hr.
Taurus: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2B511
D7
Disclaimer