Flex FWD V6-3.5L (2010)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley See: Cylinder Block Assembly/Harmonic Balancer -
Crankshaft Pulley/Service and Repair.
3. Using the Oil Seal Remover, remove and discard the crankshaft front seal.
-
Clean all sealing surfaces with metal surface prep.
Installation
1. NOTE: Apply clean engine oil to the crankshaft front seal bore in the engine front cover.
Using the Front Crankshaft Seal Installer and Crankshaft Vibration Damper Installer, install a new crankshaft front seal.
