Flex FWD V6-3.5L (2010)
17. Install the engine mount and the 3 bolts.
-
Tighten to 90 Nm (66 lb-ft).
18. Install the 4 engine mount nuts.
-
Tighten to 63 Nm (46 lb-ft).
19. Install the engine mount brace, nut and bolt.
-
Tighten to 20 Nm (177 lb-in).
20. Position the power steering pump and install the 3 bolts.
-
Tighten to 25 Nm (18 lb-ft).
21. Install the PSP tube bracket-to-power steering pump bolt.
-
Tighten to 10 Nm (89 lb-in).