Flex FWD V6-3.5L (2010)
16. NOTE: Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.
Install a new engine oil filter.
-
Tighten to 5 Nm (44 lb-in) and then rotate an additional 180 degrees.
17. Install the engine front cover. For additional information, refer to Engine.
18. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Cooling
System/Service and Repair/Cooling System Draining, Filling and Bleeding.
