Flex FWD V6-3.5L (2010)
Cabin Temperature Sensor / Switch: Service and Repair
Ambient Air Temperature Sensor
Ambient Air Temperature Sensor
Removal and Installation
1. Remove the 2 front bumper cover bolts.
-
To install, tighten to 6 Nm (53 lb-in).
2. Remove the 4 front bumper cover scrivets.
3. Working through the front bumper cover hood latch opening, detach the ambient temperature sensor pin-type retainer from the bumper beam.
4. Position the ambient air temperature sensor through the radiator grille opening to allow access to the electrical connector.
5. Disconnect the ambient air temperature sensor electrical connector and remove the ambient air temperature sensor.
6. To install, reverse the removal procedure.