Flex FWD V6-3.5L (2010)
No
REPAIR circuit CLS34 (GY) for a short to ground. TEST the system for normal operation.
-------------------------------------------------
Q4 CHECK THE SJB PARKING LAMP OUTPUT CIRCUIT FOR A SHORT TO VOLTAGE (TO REAR LAMPS)
-
Ignition OFF.
-
Disconnect: SJB C2280d.
-
Ignition ON.
-
Do the rear parking lamps continue to illuminate?
Yes
REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.
No
GO to Q5.
-------------------------------------------------
Q5 CHECK THE SJB PARKING LAMP OUTPUT CIRCUIT FOR A SHORT TO VOLTAGE (TO FRONT LAMPS)
-
Ignition OFF.
-
Disconnect: SJB C2280e.
-
Ignition ON.
-
Do the front parking lamps continue to illuminate?
Yes
REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.
No
GO to Q6.
-------------------------------------------------
Q6 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new SJB. REFER to Body Control Systems. TEST the system for normal operation.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.
-------------------------------------------------