Flex FWD V6-3.5L (2010)
5. Push the headliner up and engage the pin-type retainers.
6. Install the D-pillar trim panels.
7. NOTE: Passenger seat shown, driver similar.
Connect the seat side air bag module electrical connector, slide and engage the electrical connector locking clip.
8. Connect the seat side air bag module electrical connector, slide and engage the electrical connector locking clip.
9. Connect the 2 passenger air bag module electrical connectors.
10. Install the driver air bag module. For additional information, refer to Driver Air Bag Module See: Restraint Systems/Air Bag Systems/Air
Bag/Service and Repair/Driver Air Bag Module.
11. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering See: Supplemental
Restraint System (SRS) Depowering and Repowering.