ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2935 > < Initial Inspection and Diagnostic Overview|Page 2933
Page 67
background image

-

Is the resistance less than 5 ohms?

Yes

GO to V14.

No

CONNECT the negative battery cable. GO to V32.

-------------------------------------------------
V13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ABS MODULE DISCONNECTED

 

-

Disconnect: ABS Module C135.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a 4X4 control module, GO to V14.

If the vehicle is not equipped with a 4X4 control module, GO to V15.

No

CONNECT the negative battery cable. GO to V33.

-------------------------------------------------
V14 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE 4X4 CONTROL MODULE
DISCONNECTED

 

-

Disconnect: 4X4 Control Module C281.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to V15.

Initial Inspection and Diagnostic Overview|Page 2935 > < Initial Inspection and Diagnostic Overview|Page 2933