Flex FWD V6-3.5L (2010)
-
Connect all the SASM connectors and make sure they seat correctly.
-
Verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new SASM. REFER to Steering Wheel Rotation Sensor in Antilock Brakes / Traction Control Systems. CONNECT all modules. CLEAR
the DTCs. REPEAT the network test with the scan tool.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CONNECT all modules.
-------------------------------------------------
V37 CHECK FOR CORRECT OCSM OPERATION
-
Disconnect the OCSM connector.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect the OCSM connector and make sure it seats correctly.
-
Verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new OCSM. REFER to Restraint Systems. CONNECT all modules. CLEAR the DTCs.
REPEAT the network test with the scan tool.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CONNECT all modules.
-------------------------------------------------
V38 CHECK FOR CORRECT PSCM OPERATION
-
Disconnect all the PSCM connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the PSCM connectors and make sure they seat correctly.
-
Verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new steering gear. REFER to Steering. CONNECT all modules. CLEAR the DTCs. REPEAT the network test with the scan tool.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CONNECT all modules.
-------------------------------------------------
V39 CHECK FOR CORRECT IC OPERATION
-
Disconnect the IC connector.
-
Check for:
-
corrosion
