Flex FWD V6-3.5L (2010)
15. Detach the cushion cover J-clip and pin-type retainer.
16. Seats with power track, disconnect electrical connectors and separate pin-type retainers from under the seat.
1. Separate the connector and wire harness retainers.
2. Slide the side air bag electrical connector locking clip back.
3. Push the tab in and disconnect the side air bag module electrical connector.
4. Disconnect the backrest feed electrical connector.
17. Seats with manual track, disconnect the electrical connector and separate pin-type retainers from under the seat.
1. Separate the side air bag module electrical connector and wire harness retainers.
2. Slide the side air bag electrical connector locking clip back.
3. Push the tab in and disconnect the side air bag module electrical connector.
