Flex FWD V6-3.5L (2010)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor
Removal and Installation
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
All vehicles except Gasoline Turbocharged Direct Injection (GTDI)
2. Remove the LH catalytic converter. For additional information, refer to Exhaust System &/or Catalytic Converter.
3. Remove the bolt, nut and the heat shield.
-
To install, tighten to 10 Nm (89 lb-in).
GTDI vehicles
4. Remove the LH turbocharger. For additional information, refer to Fuel Delivery and Air Induction.
5. Remove the nut and the heat shield.
-
To install, tighten to 10 Nm (89 lb-in).
All vehicles