Flex FWD V6-3.5L (2010)
drive the vehicle using the remote start system as an admin key with no MyKey(TM) restrictions. To resolve this incompatibility, it is necessary to either
recycle the MyKey(TM) before the vehicle is driven or program the non-Ford approved remote start system as a MyKey(TM).
NOTE: It is possible to program all of the keys as MyKeys(TM) with the remote start system being the lone remaining admin key. In this particular
case, it may be necessary to use the remote start system to clear all MyKeys(TM) and turn them into admin keys. In order to do this, carry out the
following:
-
Enter the vehicle and close all doors.
-
Remote start the vehicle using the remote start fob.
-
Follow Steps 1-3 of the Disable MyKey(TM) Restricted Features procedure.
1. When using a Ford approved remote start system, the standard restricted features recognize the remote start system as an additional admin key. If
the remote start system is not Ford approved, it may not operate correctly. If a Ford approved remote start system is installed on the vehicle, the
remote start system can be programmed as a MyKey(TM), in addition to the key that is also programmed as a MyKey(TM). To program the
remote start system as a MyKey(TM), follow the steps below:
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using a remote start fob.
3. Follow Steps 1-3 of the Program a MyKey(TM) procedure.
