Flex FWD V6-3.5L (2010)
4. Remove the steering column shaft-to-steering column bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
5. Remove the 3 steering column shaft boot nuts.
-
To install, tighten to 9 Nm (80 lb-in).
6. Remove the steering column shaft-to-steering gear bolt.
-
To install, tighten to 25 Nm (18 lb-ft).
7. Remove the steering column shaft.
8. To install, reverse the removal procedure.
-
If installing a new steering column shaft, transfer parts as needed.
-
Remove the constant tension clamp and the steering column shaft boot.