Flex FWD V6-3.5L (2010)
21. NOTE: RH shown, LH similar.
Remove and discard the front subframe bolts.
22. Lower the subframe assembly from the vehicle.
Installation
All vehicles
1. Using the Powertrain Lift Table, raise the subframe into the installed position.
2. NOTE: RH shown, LH similar.
Install the 2 new front subframe bolts.
-
Tighten to 200 Nm (148 lb-ft).
3. NOTE: RH shown, LH similar.
Position the subframe brackets and install the 4 new bolts finger-tight.
4. NOTE: RH shown, LH similar.