Flex FWD V6-3.5L (2010)
Rear Subframe: Service and Repair
Subframe - Rear
Subframe - Rear
NOTE: All-Wheel Drive (AWD) shown, Front Wheel Drive (FWD) similar.
Removal and Installation
1. Measure and record the vehicle ride height. For additional information, refer to Suspension &/or Alignment.
2. Remove the rear wheels. For additional information, refer to Wheels and Tires.
3. With a wax pencil, mark the relational alignment of the rear subframe to the underbody at the mounting locations.
4. Remove the muffler and tail pipe. For additional information, refer to Exhaust System &/or Catalytic Converter.
5. NOTE: If equipped, index-mark the driveshaft before disconnecting from the rear drive axle.
