Flex FWD V6-3.5L (2010)
11. Cut floor console bridge where indicated in the illustration. Remove and discard the piece of floor console.
12. NOTE: Selector lever removed for clarity.
Remove the 4 selector lever bolts and remove the selector lever from the vehicle.
Installation
1. Install the selector lever and the 4 selector lever bolts.
-
Tighten to 11 Nm (97 lb-in).
2. Connect the electrical connector.
3. Install the selector lever cable on the selector lever bracket. Make sure the 2 clips are securely in place on the selector lever bracket.