Flex FWD V6-3.5L (2010)
Installation
Vehicles with a TCS
1. Route the TCS wiring harness through the selector lever bezel and connect the TCS electrical connector.
2. NOTE: Selector lever removed for clarity.
Position the selector lever bezel in place.
-
Be sure the 4 tabs are locked in place.
All vehicles
3. Position the selector lever knob and knob bezel in place and install the screws.
4. Slide the lower selector lever knob bezel up and snap it into place.
Vehicles with a TCS
5. Install the upper console panel.
