Flex FWD V6-3.5L (2010)
Removal
1. Remove the driveshaft. For additional information, refer to Drive/Propeller Shafts, Bearings and Joints.
2. Using the Drive Pinion Flange Holding Fixture, hold the pinion flange and remove the nut.
-
Discard the nut.
3. Index-mark the location of the pinion to the yoke.
4. Using the 2 Jaw Puller, remove the pinion flange.
5. Using the Torque Converter Fluid Seal Remover and Slide Hammer, remove the seal.