Flex FWD V6-3.5L (2010)
Transmission Speed Sensor: Service and Repair
Turbine Shaft Speed (TSS) Sensor
Turbine Shaft Speed (TSS) Sensor
Removal
1. Remove the main control cover.
-
For vehicles equipped with a 3.5L engine, refer to Main Control Cover - 3.5L See: Automatic Transmission/Transaxle/Fluid Pan/Service and
Repair.
-
For vehicles equipped with a 3.5L Gasoline Turbocharged Direct Injection (GTDI) engine, refer to Main Control Cover - 3.5L GTDI See:
Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.
2. Disconnect the Transmission Range (TR) sensor electrical connector.
1. Slide the lock over.
2. Press the tab and disconnect the connector.
3. Disconnect the Turbine Shaft Speed (TSS) and Output Shaft Speed (OSS) sensor electrical connectors.