Flex FWD V6-3.5L (2010)
28. Lower the headliner.
29. Remove the 2 sunshade-to-headliner retaining screws.
30. Remove the 6 sunshade track-to-headliner retaining screws.
31. Remove the sunshade assembly from the headliner.
32. Remove the 2 sunshade stop-to-track retaining screws and the stops that are the located at the closest point to the sunshade on the track.
33. Slide the sunshade off the sunshade tracks.
Sunshade tracks
34. Remove the 2 remaining sunshade stop-to-track retaining screws and the stops that are located at the opposite end of the tracks.
35. Install the 2 front sunshade stops and retaining screws onto the new tracks.
Sunshade
36. To install, reverse the removal procedure.
-
Make sure that the sunshade does not bind on the sunshade tracks, then tighten the sunshade track screws.