Flex FWD V6-3.5L (2010)
Wiper Motor: Service and Repair
Wiper Motor - Rear Window
Wiper Motor - Rear Window
Removal and Installation
1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Arm/Service and Repair/Wiper Pivot
Arm - Rear.
2. Remove the liftgate trim panel.
3. Remove the 3 rear window wiper motor assembly bolts.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the rear window wiper motor assembly.
-
Disconnect the electrical connectors.
5. To install, reverse the removal procedure.