Focus L4-2.0L (2009)
Alarm System Transmitter: Service and Repair
Passive Anti-Theft System (PATS) Transceiver
Removal and Installation
1. Remove the 3 screws and the lower steering column shroud.
2. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
3. Lift the 2 locking tabs and remove the PATS transceiver.
4. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
To install, reverse the removal procedure.