ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Radiator Grille Opening Panel Reinforcement|Page 6327 > < Radiator Grille Opening Panel Reinforcement
Page 2
background image

7. Remove the hood latch bolts and position the hood latch aside.

-

To install, tighten to 9 Nm (80 lb-in).

8. Disconnect the horn and the A/C switch connectors at the lower front passengers side of the vehicle.

9. Release the wiring harness retainers from the radiator grille opening panel reinforcement.

10. Remove the pin-type retainers from the left and right air deflectors-to-radiator grille opening panel reinforcement and remove the air deflectors.

11. Remove the pin-type retainers from the front bumper cover mounting bracket-to-radiator grille opening panel reinforcement.

12. Remove the radiator grille opening panel reinforcement-to-bumper beam bolts.

-

To install, tighten to 25 Nm (18 lb-ft).

Radiator Grille Opening Panel Reinforcement|Page 6327 > < Radiator Grille Opening Panel Reinforcement