Focus L4-2.0L (2009)
5. Install the driver air bag module to the steering wheel.
-
Firmly press the driver air bag module to engage the 3 driver air bag module wire clips to the steering wheel.
6. NOTE: The passenger air bag module electrical connector is located below the passenger air bag module.
Connect the passenger air bag module electrical connector.
7. Close the glove compartment door.
8. Under the front of the driver seat, connect the seat-to-floor connector.
9. Under the front of the passenger seat, connect the seat-to-floor connector.
10. NOTE: RH shown, LH similar.
Connect the LH and RH side air curtain module electrical connectors.
11. NOTE: Two-door shown, 4-door similar.
Install the LH and RH rear seat belt retractor trim covers to the quarter trim panel.
12. NOTE: Two-door shown, 4-door similar.
Install the LH and RH C-pillar trim panels, screws and access covers.
