Focus L4-2.0L (2009)
Sunroof / Moonroof Panel: Service and Repair
Roof Opening Panel Glass
Roof Opening Panel Glass
Removal
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including: whenever
the roof opening panel motor has been removed from the roof opening panel system, the roof opening panel glass has been removed from the roof
opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a new
roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to Roof Opening
Panel Motor Initialization See: Testing and Inspection/Programming and Relearning.
1. Position the roof opening panel to the CLOSED position.
2. Remove the 4 roof opening panel glass screws.
3. Remove the roof opening panel glass.
Installation
1. NOTE: Do not fully tighten the roof opening panel glass screws at this stage.
Position the roof opening panel glass and loosely install the 4 screws.
2. Align the roof opening panel glass. For additional information, refer to Roof Opening Panel Alignment See: Adjustments.
3. Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization See: Testing and
Inspection/Programming and Relearning.