Focus L4-2.0L (2009)
4. Press the retaining clip and disconnect the parking brake cable from the backing plate.
5. Remove the wheel speed sensor bolt and position the sensor aside.
-
To install, tighten the bolt to 9 Nm (80 lb-in).
6. Remove the 4 wheel spindle bolts, the wheel spindle and the backing plate.
-
To install, tighten the bolts to 103 Nm (76 lb-ft).
7. NOTE: Prior to installing the wheel cylinder, apply a bead of the specified sealant to the wheel cylinder as shown.
NOTE: Make sure that all mating surfaces are free of foreign material.
To install, reverse the removal procedure.
8. Bleed the wheel cylinder.