Focus L4-2.0L (2009)
Brake Shoe: Service and Repair
Brake Shoes
Removal and Installation
1. Remove the parking brake control boot.
-
Release the boot clip.
-
Lift the boot upward and over the parking brake control handle.
2. NOTE: Make sure the rear brakes are cool to the touch.
Move the parking brake control to the fully released position.
3. Relieve the tension on the parking brake cable.
-
Loosen the adjustment nut.
4. Remove the brake drum. For additional information, refer to Brake Drum See: Brake Drum/Service and Repair.
5. Remove the hold-down clips and pins.
6. NOTE: Do not allow the wheel cylinder pistons to fall out of the wheel cylinder bore.
Disconnect the brake shoes from the wheel cylinder.
-
Using a suitable tool, hold the wheel cylinder pistons in place.