Focus L4-2.0L (2009)
-
Using a suitable tool, hold the wheel cylinder pistons in place.
4. Disconnect the brake tube fitting from the wheel cylinder.
-
To install, tighten to 15 Nm (133 lb-in).
5. Remove the 2 wheel cylinder bolts and the wheel cylinder.
-
To install, tighten to 12 Nm (106 lb-in).
6. NOTE: Prior to installing the wheel cylinder, apply a bead of the specified sealant to the wheel cylinder as shown.
NOTE: Make sure that all mating surfaces are free of foreign material.
To install, reverse the removal procedure.
7. Bleed the wheel cylinder.
8. NOTE: The internal auto-adjuster must be set and the brake shoes centralized to the brake drum.
Carry out the brake shoe adjustment. For additional information, refer to Brake Shoe Adjustment See: Brake Shoe/Adjustments.
