Focus L4-2.0L (2009)
7. Position the exhaust tailpipe and muffler assembly aside.
1. Remove and discard the muffler flange nuts and gasket.
-
To install, tighten the new nuts to 47 Nm (35 lb-ft).
-
Install new gasket.
2. Disconnect the hanger isolators.
8. Remove the 4 nuts and the exhaust center heat shield.
9. Separate the parking brake cable from the equalizer and position the cable grommet up through the floor.
10. Remove the 3 parking brake control bolts and the parking brake control.
-
To install, tighten to 18 Nm (159 lb-in).
11. To install, reverse the removal procedure.
-
Adjust the parking brake. For additional information, refer to Parking Brake Cable Adjustment See: Parking Brake Cable/Adjustments.
