Focus L4-2.0L (2009)
Removal and Installation
1. Remove the 2 expansion tank bolts.
-
To install, tighten to 4 Nm (35 lb-in).
2. Lift the coolant expansion tank off of the engine mount stud bolt and position it aside.
3. Install the Engine Support Bar.
4. Remove the 2 engine mount nuts.
-
To install, tighten to 90 Nm (66 lb-ft).
5. Remove the 2 bolts, stud bolt and the engine mount.
-
To install, tighten to 48 Nm (35 lb-ft).
6. To install, reverse the removal procedure.
