Focus L4-2.0L (2009)
Idler Pulley: All Technical Service Bulletins
Engine - Cold Start Drive Belt Whine/Whistle
TSB 09-1-1
01/26/09
COLD START FRONT END ACCESSORY DRIVE
(FEAD) WHINE / WHISTLE NOISE
FORD:
2009 Focus, Escape
MERCURY:
2009 Mariner
ISSUE
Some 2009 Focus vehicles equipped with a 2.0L engine built from 8/15/2008, 2009 Escape and Mariner vehicles equipped with a 2.5L engine built from
10/27/2008 to 11/28/2008 may exhibit a front end accessory drive (FEAD) related high-pitched metallic whine / whistle noise. This noise may be caused
by the idler pulley.
ACTION
Follow the Service Procedure steps to correct the
condition.
SERVICE PROCEDURE
NOTE
FEAD IDLER PULLEY NOISE MAY BE MOST APPARENT BETWEEN 1100-1500 RPM, AND MAY BE MORE NOTICEABLE ON
ENGINE DECELERATION FROM 1500 RPM. NOISE WILL BE ELIMINATED WITH FEAD BELT REMOVED.
Replace the accessory drive belt idler pulley. Reference Workshop Manual (WSM), Section 303-05.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
090101A
2009 Escape, Mariner
0.5 Hr.
2.5L, 2009 Focus 2.0L:
Replace The Accessory
Drive Belt Idler Pulley (Do
Not Use With 8678A,
8620F)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
8678
14
Disclaimer
