Focus L4-2.0L (2009)
Air Bag Deactivation Indicator: Service and Repair
Passenger Air Bag Deactivation (PAD) Indicator
Removal and Installation
NOTE: The Passenger Air Bag Deactivation (PAD) indicator is part of the Hazard/ Traction control switch assembly.
1. NOTE: Ignition must be OFF when disconnecting the PAD indicator electrical connector. Otherwise, a DTC will be set in the Restraints Control
Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.
2. Remove the instrument panel center finish panel.
3. Disconnect the PAD indicator electrical connector.
4. Disengage the lock tabs and remove the PAD indicator from the instrument panel center finish panel.
5. To install, reverse the removal procedure.
