Focus L4-2.0L (2009)
Compass: Adjustments
Compass Zone Adjustment
Compass Zone Adjustment
Compass Calibration Zone Map
1. Refer to the compass calibration zone map (above) to select the correct compass zone setting for the geographic location of the vehicle.
2. With the key in the ON position, press and hold the MODE button for approximately 5 seconds until the display shows the current zone setting.
Release the MODE button.
3. NOTE: Approximately 5 seconds after the button has been released, the compass display will exit the zone setting mode.
Before the zone setting mode turns off, momentarily press and release the MODE button to increase the zone increment by one. Set the zone
display number to match the vehicle geographical location that is shown on the compass calibration zone map (above).
4. Release the MODE button to exit the zone setting mode.
