ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7282 > < Initial Inspection and Diagnostic Overview|Page 7280
Page 5
background image

-

Is the resistance greater than 10,000 ohms?

Yes

GO to P6.

No

REPAIR the circuit. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
P4 CHECK CIRCUIT CLS30 (VT/WH) FOR A SHORT TO VOLTAGE (TO REAR LAMPS)

-

Ignition OFF.

-

Disconnect: SJB C2280d.

-

Ignition ON.

-

Do the rear parking lamps continue to illuminate?

Yes

REPAIR the circuit. TEST the system for normal operation.

No

GO to P5.

-------------------------------------------------
P5 CHECK CIRCUIT CLS30 (VT/WH) FOR A SHORT TO VOLTAGE (TO FRONT LAMPS)

-

Ignition OFF.

-

Disconnect: SJB C2280e.

-

Ignition ON.

-

Do the front parking lamps continue to illuminate?

Yes

REPAIR the circuit. TEST the system for normal operation.

No

GO to P6.

-------------------------------------------------
P6 CHECK FOR CORRECT SJB OPERATION

-

Ignition OFF.

-

Disconnect all the SJB connectors.

-

Check for:
-

corrosion

-

damaged pins

-

pushed-out pins

-

Connect all the SJB connectors and make sure they seat correctly.

-

Operate the system and verify the concern is still present.

-

Is the concern still present?

Yes

Initial Inspection and Diagnostic Overview|Page 7282 > < Initial Inspection and Diagnostic Overview|Page 7280