Focus L4-2.0L (2009)
Alignment: Service and Repair
Toe Adjustment - Front
Toe Adjustment - Front
1. Using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
2. Using alignment equipment and the manufacturer's instructions, measure the toe.
3. Loosen the tie-rod end jam nuts.
4. Remove the steering gear boot outer clamps.
5. Rotate the tie rods as necessary to adjust the toe setting.
6. Tighten the tie-rod end jam nuts to 80 Nm (59 lb-ft).
7. Install the steering gear boot outer clamps.
8. Recheck the toe settings, adjust as necessary.
