Focus L4-2.0L (2009)
13. Position the lower heat shield and install the 3 bolts.
-
Tighten to 11 Nm (97 lb-in).
14. Install the catalytic converter-to-engine bracket and the 2 bolts.
-
Tighten to 47 Nm (35 lb-ft).
15. Install the 2 catalytic converter bracket-to-engine bracket bolts.
-
Tighten to 23 Nm (17 lb-ft).
Non-PZEV
16. Using a new gasket, attach the catalytic converter-to-muffler and tailpipe assembly and install the 2 new nuts.
-
Tighten to 47 Nm (35 lb-ft).
PZEV
17. Using a new gasket, attach the exhaust flexible pipe-to-muffler and tailpipe assembly and install the 2 new nuts.
-
Tighten to 47 Nm (35 lb-ft).
All vehicles
18. Remove the exhaust flexible pipe support wrap or suitable splint.
19. Install the upper heat shield and the 6 bolts.
-
Tighten to 11 Nm (97 lb-in).
